Branch Indicator

  • You are here: S&P Switzerland

Languages

Products

Related System

S&P FRP Systems

Structural reinforcement with fibre composites

S&P C-Sheet 240

S&P C-Sheet 240

S&P C-Sheet 240 is a unidirectional carbon fibre fabric with high strength for structural reinforcement. Can be applied in a dry or wet process.

S&P C-Sheets are applied (stuck on) to the building element in question using the laminating resin (S&P Resin 55 HP or S&P Resicem HP).

S&P C-Sheet 240

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Features

  • Flexible application, even on curved surfaces such as pillars, columns, silos, chimneys, walls, arched slabs, etc.
  • Available in a variety of widths and thicknesses
  • Low self-weight and a small application thickness
  • Simple, flexible and economic strengthening method
  • No corrosion
  • Very short interruption of normal use of the relevant building or infrastructure
  • No noise and no vibration during installation

Application

Strengthening or reinforcement of bearing structures made from reinforced concrete, masonry, and timber, for axial, shear, and bending tensile stresses.

  • Increasing strength and ductility of columns
  • Increasing axial load by "wrapping" columns
  • Increasing imposed loads
  • Replacement of corroded or missing reinforcement
  • In case of a change in the nature of imposed loads
  • Correcting of design and/or building mistakes
  • Increasing resistance to an earthquake
  • Extension of service life and durability
  • Complying with the latest standards

 

Image Gallery

  • Applikation S&P C-Sheet 240
  • Applikation S&P C-Sheet 240
  • Applikation S&P C-Sheet 240

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Service

Contact person

Documentation

Installation Instructions

Brochure

Design guideline

International Product Information

Software

  • FRP Colonna

    FRP Colonna is a design software for reinforcement of centrally loaded concrete columns by wrapping S&P FRP Sheets. FRP Colonna may be used for preliminary and final design of structural reinforcement. For a known axial force, the software calculates the required layers wrapping with S&P Aramid-, Carbon-, or Glass Sheet.

    FRP Colonna does not check buckling.

    Features: 
    Current version 1.7
  • FRP Lamella

    FRP Lamella is a design software for flexural and/ or shear reinforcement with S&P FRP systems. FRP Lamella may be used for preliminary and final design of structural reinforcement. For known bending moments and shear forces, the software calculates the required S&P C-Laminate and/ or S&P FRP Sheet.

    Features: 
    Current version 5.6.01

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • DeliveryS&P C-Sheet 240 (200 g/m²)S&P C-Sheet 240 (300 g/m²)S&P C-Sheet 240 (400 g/m²)S&P C-Sheet 240 (600 g/m²)
      Width of roll:300 or 600 mm300 or 600 mm300 or 600 mm300 mm
      Length of roll:100 m100 m100 m100 m
      (special sheets upon request)
    • Storage
      Storage temperature between +5 °C and +35 °C. Store in a dry place and protect fro direct sunlight.
    • Item numberArticlePackaging unit / weightDimension
      CS240200300S&P C-Sheet 240 200 g/m²1 roll = 30.00 m² / 8.35 kgH x Ø = 0.32 m x 0.25 m
      (roll of 300 mm x 100 m)
      CS240200600S&P C-Sheet 240 200 g/m²1 roll = 60.00 m² / 17.00 kgH x Ø = 0.64 m x 0.27 m
      (roll of 600 mm x 100 m)
      CS240300300S&P C-Sheet 240 300 g/m²1 roll = 30.00 m² / 11.40 kgH x Ø = 0.32 m x 0.26 m
      (roll of 300 mm x 100 m)
      CS240300600S&P C-Sheet 240 300 g/m²1 roll = 60.00 m² / 22.20 kgH x Ø = 0.64 m x 0.28 m
      (roll of 600 mm x 100 m)
      CS240400300S&P C-Sheet 240 400 g/m² 1 roll = 30.00 m² / 14.30 kgH x Ø = 0.32 x 0.30 m
      (roll of 300 mm x 100 m)
      CS240400600S&P C-Sheet 240 400 g/m²1 roll = 60.00 m² / 28.00 kgH x Ø = 0.64 m x 0.30 m
      (roll of 600 mm x 100 m)
      CS240600300S&P C-Sheet 240 600 g/m² 1 roll = 30.00 m² / 20.65 kg H x Ø = 0.32 m x 0.33 m
      (roll of 300 mm x 100 m)

Safety Data

  • For detailed safety information it is recommended to seek advice in the current safety data sheet.

Installation Instructions

  • Treatment

    Cut sheets with scissors or a knife and ruler. Never bend the sheet in the longitudinal direction! (sheet may only be folded parallel to the fibre. The S&P C-Sheet 240 can be applied in a dry or wet “lay-up” process.

    For details please refer to the application manual for S&P C-Sheet 240.

You are here

    Contact

    S&P

    SIMPSON Strong-Tie

    Meta Navigation en-CH