Branch Indicator

  • You are here: S&P Switzerland

Languages

Products

Related System

S&P FRP Systems

Structural reinforcement with fibre composites

S&P G-Sheet E 90/10 B - S&P G-Sheet AR 90/10 B

S&P G-Sheet E 90/10 B - S&P G-Sheet AR 90/10 B

S&P G-Sheet 90/10 is a bidirectional glass fibre fabric with high strength for structural reinforcement. It can be applied in a dry or wet lay-up process. S&P G-Sheets are applied (stuck-on) to the building element in question using laminating resin (S&P Resin 55 HP or S&P Resicem HP).

S&P G-Sheet E 90/10 B, S&P G-Sheet AR 90/10 B

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Features

  • Flexible application, even on curved surfaces such as pillars, columns, silos, chimneys, walls, arched slabs, etc.
  • Low self-weight and small installation thickness
  • Easy, flexible, and economical strengthening method
  • No corrosion
  • Very short interruption in the normal use of the building
  • No noise and no vibration during installation


 

Application

  • Strengthening or reinforcement of bearing structures made from reinforced concrete and masonry, against flexural (bending tensile) and axial stresses
  • Increasing strength and ductility of columns and walls
  • Increasing resistance to an earthquake
  • Increasing imposed loads
  • Replacement of corroded or missing reinforcement
  • In case of a change in the nature of imposed loads
  • Correction of design and/or building mistakes
  • Extension of service life and durability
  • Complying with the latest standards
   

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Service

Contact person

Documentation

Brochure

Design guideline

International Product Information

Software

  • FRP Colonna

    FRP Colonna is a design software for reinforcement of centrally loaded concrete columns by wrapping S&P FRP Sheets. FRP Colonna may be used for preliminary and final design of structural reinforcement. For a known axial force, the software calculates the required layers wrapping with S&P Aramid-, Carbon-, or Glass Sheet.

    FRP Colonna does not check buckling.

    Features: 
    Current version 1.7

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • Delivery S&P G-Sheet E 90/10 B (880 g/m²)S&P G-Sheet AR 90/10 B (880 g/m²)
      Widht of roll:670 mm670 mm
      Length of roll:50 m50 m
      (special sheets upon request)
    • Storage
      Storage temperature between +5 °C and +35 °C. Store in a dry place and protect from direct sunlight.
    • Item numberArticle
      GSE09010B67S&P G-Sheet E 90/10 Typ B
      GSAR9010B67S&P G-Sheet AR 90/10 Typ B

Safety Data

  • For detailed safety information it is recommended to seek advice in the current safety data sheet.

Installation Instructions

  • Cut sheets with scissors or knife and ruler. Never bend the sheets! (Sheet may only be folded parallel to the fibre). The S&P G-Sheet can be applied in a dry or wet lay-up process.

    For details please refer to the application manual for S&P G-Sheet E/AR.

You are here

    Contact

    S&P

    SIMPSON Strong-Tie

    Meta Navigation en-CH