Branch Indicator

  • You are here: S&P Switzerland

Languages

Products

Related System

S&P FRP Systems

Structural reinforcement with fibre composites

S&P A-Sheet 120

S&P A-Sheet 120

S&P A-Sheet 120  is a unidirectional aramid fibre fabric with high strength and toughness.

S&P A-Sheet 120 is applied (stuck on) using the laminating resin S&P Resin 55 HP or with the water vapour permeable system S&P Resicem HP.


 

S&P A-Sheet

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Features

  • Flexible application, even on curved surfaces as pillars, columns, silos, chimneys, walls, arched slabs, etc.
  • Low self-weight and a small application thickness
  • Simple, flexible and economical strengthening method
  • No corrosion
  • Non-conductive
  • Very high abrasion and tear resistance
  • Very short interruption of normal use of the relevant building or infrastructure
  • No noise and no vibration during installation

Application

Strengthening or reinforcement of bearing structures made from reinforced concrete, masonry, and timber, for axial, shear, and bending tensile stresses.

  • Protection of columns and bracing structures against vehicle collisions and other impacts
  • Increasing earthquake resistance (concrete + masonry)
  • Protection from explosion (accidents or terrorism)
  • Increasing imposed loads
  • In electrical environments, where non-conductive material is requested
  • In case of a change in the nature of imposed loads
  • Correction of design and/or building mistakes
  • Improving serviceability and suitability
  • Complying with the latest standards

Image Gallery

  • Applikation S&P A-Sheet 120

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Service

Contact person

Documentation

Installation Instructions

Brochure

Design guideline

International Product Information

Software

  • FRP Colonna

    FRP Colonna is a design software for reinforcement of centrally loaded concrete columns by wrapping S&P FRP Sheets. FRP Colonna may be used for preliminary and final design of structural reinforcement. For a known axial force, the software calculates the required layers wrapping with S&P Aramid-, Carbon-, or Glass Sheet.

    FRP Colonna does not check buckling.

    Features: 
    Current version 1.7

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • Delivery
      Width of roll: 300 mmLength of roll: 100 m(special sheets upon request)
    • Storage
      Storage temperature between + 5 °C and + 35 °C. Product must be stored in a dry place, away from direct sunlight.
    • Item numberArticle
      AS120290300S&P A-Sheet 120 (290 g/m²)

Installation Instructions

  • Treatment

    Cut the sheets with special aramid scissors. Never bend the sheet in longitudinal direction! (sheet may only be folded parallel to the fibre).The S&P A-Sheet 120 is applied in a dry or wet process.

    For more details please refer to the application manual of S&P A-Sheet 120.

You are here

    Contact

    S&P

    SIMPSON Strong-Tie

    Meta Navigation en-CH