Branch Indicator

  • You are here: S&P Switzerland

Languages

Products

Related System

S&P Asphalt reinforcement

Fibre reinforcement grids for asphalt surfaces

S&P Carbophalt® G

S&P Carbophalt® G

S&P Carbophalt® G is a pre-bituminised asphalt reinforcement grid made of carbon and glass fibres for local and/or complete surface reinforcement of bituminous surfaces. 

S&P Carbophalt® G

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Features

  • Increases the load-bearing capacity
  • Measurable improvement of the structural value due to high tensile strength at small elongation
  • Minimises crack formation and prevents crack reflection
  • Reduces fatigue and thermal cracks
  • Grid structure freely moveable through heat application (no fixed knots)
  • Local application on existing cracks/joints or complete surface application
  • No waiting time - immediate road construction possible
  • Lower consumption of tack coat thanks to the pre-bituminised grid
  • Easy and efficient application with unrolling equipment (also in curves)
  • Effectiveness at a cover layer of min. 2 cm
  • Can be milled and recycled without problems

Application

  • Used against cracking
  • Prevents crack reflection
  • Increases the durability of asphalt surfaces
  • Increases the load bearing capacity of asphalt surfaces
  • The pre-bituminisation guarantees the required layer bonding between old and new road surfaces


 

Image Gallery

Call to Action

Pin status

This page is not pinned. Pin this.

Webform

  • Product Request

    You need further information or have questions about this product? Send us a message, we will contact you.

Service

Contact person

Documentation

Brochure

International Product Information

Data Area

Product Information

We appreciate your interest. Take a look at the data. If you have any questions or need help, please contact us.

Logistic Data

    • Delivery
      Width of roll0.97 / 1.50 / 1.95 m (further on request)
      Length of roll50 m
    • Item numberArticle Packaging unit / weightDimension
      CAG0097200S&P Carbophalt G (0.97 m)1 roll = 48.50 m² / 33.900 kg L x Ø = 1.00 m x 0.32 m
      1 pallet = 533.50 m² / 393.000 kg / 11 rollsL x B x H = 1.20 m x 0.80 m x 1.15 m
      CAG0150200S&P Carbophalt G (1.50 m)1 roll = 75.00 m² / 52.450 kg L x Ø = 1.50 m x 0.32 m
      1 pallet = 1'500.00 m² / 1'090.000 kg / 20 rollsL x B x H = 1.65 m x 1.05 m x 2.00 m
      CAG0195200S&P Carbophalt G (1.95 m)1 roll = 97.50 m² / 68.200 kg L x Ø = 1.95 m x 0.32 m
      1 pallet = 1'950.00 m² / 1'405.000 kg / 20 rollsL x B x H = 2.00 m x 1.05 m x 2.00 m

Installation Instructions

  • - Clean substrate free of dust and grease
    - Apply polymer modified emulsion on dry surface
    - Apply S&P Carbophalt® G on dry surface by machine or manually, if possible immediately before pavement construction.
    - Apply at temperatures > 3 °C. The minimum temperatures cf. SN 640 430b apply for application of layers.
    - Observe overlapping lengths of 10 to 20 cm
    - Overlapping of reinforcement should be optimised according to the nature and location of joints and cracks, as well as wheel loading.
    - If the S&P grid is applied only on local areas, it must be covered manually with bituminous mixture. This prevents the cracking caused by passing vehicles.
    - Minimum cover layer thickness of 2 cm on top of S&P Carbophalt® G

You are here

    Contact

    S&P

    SIMPSON Strong-Tie

    Meta Navigation en-CH